- Chassis brand: КАМАЗ
- Wheel formula: 6 х 4
- Body capacity: 10
| Winter version 1 | |
| Base chassis type | КАМАЗ-65115 |
| Wheel arrangement | 6х4 |
| Permissible gross vehicle weight, kg (МК-4433-07/МК-4433-08) | 22400 / 25200 |
| Tipper load capacity, kg | 14000 |
| СО-1 body volume, m3 | 10 |
| Capacity of hopper ПСР-12, m3 | 6,5 |
| Width of de-icing material distribution, m | 2-12 |
| Density of de-icing materials distribution, g/m2 | 50-350 |
| Snow clearing width with ОСГ-7 blade, m | 2,65 |
| Cleaning width of inter-base brush ЩО-10, m | 2,55 |
| Snow clearing width with ОСГ-7 blade, m | 11,9х3,31х3,7 |
| Additional options: | |
| 1.Moistening system (used in the technology of technical salt sprinkling) (the basic configuration can be supplied with FC-25 pump with hydraulic motor 210.12, + g/distributor section, + water collectors, PVC hoses, pipes, VFD) | |
| 2. belt-and-chain conveyor (replaces conveyor type ПР-12Ц.01 with ПР-12.01) (Additional payment of price difference) | |
| 3. СО-1-1 Dump body (volume - 16m³) (extra charge). | |
| 4. Bunker ПСР-13 (volume - 8,2m³) (additional payment) | |
| 5. Bunker ПСР-16 (volume - 13m³) (extra charge) (used only with dump body СО-1-1). | |
| 6. ОСГ-7 Front rotary blade | |
| 7. ОСС-3 Speed blade (snow clearing width - 2700 mm) | |
| 8. ОСМ-4 Medium blade (snow clearing width - 2600 mm) | |
| 9. ОСБ-5 Side blade (snow clearing width - 2600 mm) 10. | |
| 10. ЩО-10 Inter-base brush (ЩО + mounting on the chassis + replacement of the 2F unit with the 3F unit + pipes, fittings and hoses from the hydraulic valve and the 3F unit to the ЩО) | |
| 11. Automation system (replacement of the cable distributor on the electromagnetic + ACS) | |
| 12. Hella lighting equipment (additional payment of cost difference between standard and Hella). | |
| СО-1 dumping equipment; | |
| ПСР-12Ts without humidification, without automatic system, with shuttering mechanism, chain version (conveyor chain 5M/РС); | |
| Hydraulic cabinet ГШ-2 (hydraulic distributor 4 sections + valve block 2F, etc.); | |
| Bumper special БС-65115; | |
| Additional electrical equipment is standard: headlamps, turn indicators. | |
| Winter version 2 | |
| Base chassis type | КАМАЗ-65115 |
| Wheel arrangement | 6х4 |
| Permissible gross vehicle weight, kg (МК-4433-07/МК-4433-08) | 22400 / 25200 |
| Tipper load capacity, kg | 14000 |
| СО-1 body volume, m3 | 10 |
| Tank volume, m3 | 10 |
| Width of de-icing material distribution, m | 1-7 |
| Density of de-icing materials distribution, g/m2 | 10-150 |
| Snow clearing width with ОСГ-7 blade, m | 2,65 |
| Cleaning width of inter-base brush ЩО-10, m | 2,55 |
| Snow clearing width with ОСГ-7 blade, m | 11,9х3,31х3,7 |
| Additional options: | |
| 1.Installation of a pump unit with AR-370 pump (surcharge for the difference between pump units) | |
| 2.Dump body СО-1-1 (volume - 16m³) (additional payment) | |
| 3.ОСГ-7 Front rotary moldboard | |
| 4. ОСС-3 Speed blade (snow clearing width - 2700 mm) | |
| 5. ОСМ-4 Medium blade (snow clearing width - 2600 mm) | |
| 6. ОСБ-5 Side blade (snow clearing width - 2600 mm) 7. | |
| 7. ЩО-10 Inter-base brush (ЩО + mounting on the chassis + distributor section + replacement of 2F block with 3F block + pipes, fittings and VFD from the hydraulic distributor and 3F block to ЩО) | |
| 8. Automation system (replacement of cable distributor to electromagnetic + ACS) | |
| 9. Hella lighting equipment (additional payment of cost difference between standard and Hella) | |
| СО-1 dumping equipment; | |
| ПМ-43 with 4 plastic tanks 2,5 m³, pump X65-50, liquid reagent distributor ПМР-41, without automation system; | |
| Hydraulic cabinet ГШ-2 (hydraulic distributor 4 sections + valve block 2F, etc.); | |
| Bumper special БС-65115; | |
| Additional electrical equipment is standard: headlamps, turn indicators. | |
| All-season version | |
| Wheel arrangement | 6х4 |
| Permissible gross vehicle weight, kg (МК-4433-07/МК-4433-08) | 22400 / 25200 |
| Capacity of hopper ПСР-12, m3 | 6,5 |
| Width of de-icing material distribution, m | 2-12 |
| Density of de-icing materials distribution, g/m2 | 50-350 |
| Snow clearing width with ОСГ-7 blade, m | 2,65 |
| Cleaning width of inter-base brush ЩО-10, m | 2,55 |
| Tank volume, m3 | 10 |
| Washing width with comb, m | 2,5 |
| Washing width with side nozzles, m | 10 |
| Snow clearing width with ОСГ-7 blade, m | 11,9х3,31х3,7 |
| Additional options: | |
| 1.Moistening system (used in the technology of technical salt sprinkling) (the basic configuration can be supplied with FC-25 pump with hydraulic motor 210.12, + g/distributor section, + water collectors, PVC hoses, pipes, VFD) | |
| 2. belt-and-chain conveyor (replaces conveyor type ПР-12Ц.01 with ПР-12.01) (Additional payment of price difference) | |
| 3.ОСГ-7 Front rotary moldboard | |
| 4. ОСС-3 Speed blade (snow clearing width - 2700 mm) | |
| 5. ОСМ-4 Medium blade (snow clearing width - 2600 mm) | |
| 6. ОСБ-5 Side blade (snow clearing width - 2600 mm) 7. | |
| 7. ЩО-10 Inter-base brush (ЩО + mounting on the chassis + distributor section + replacement of 2F block with 3F block + pipes, fittings and VFD from the hydraulic distributor and 3F block to ЩО) | |
| 8. Automation system (replacement of cable distributor to electromagnetic + ACS) | |
| 9. ЩБП Front curb brush | |
| OM-8 Equipment hinged washing for noise shields (Can be supplied with pipes, VFD, fittings, fittings, BDS, connections distributor. | |
| 11. Installation of a pump unit with an HMU-40 pump (Extra charge for the difference between pump units) ) | |
| 12. Hella lighting equipment (additional payment of cost difference between standard and Hella). | |
| СО-1 dumping equipment; | |
| ПСР-12Ts without humidification, without automatic system, with shuttering mechanism, chain version (conveyor chain 5M/РС); | |
| Hydraulic cabinet ГШ-2 (hydraulic distributor 4 sections + valve block 2F, etc.); | |
| Water-washing equipment PM-43 with 4 plastic tanks 2,5 m³, OM-4, Water Pump AR-370; | |
| Bumper special БС-65115; | |
| Additional electrical equipment is standard: headlamps, turn indicators. |
Width of the cultivated strip, mm: 2620.
Weight: not more than 500 kg.
Blade width: 3360mm.
Height: 770 mm.
Working speed: not more than 40 km/h.
Working angle of rotation: 37 degrees.
Collision protection: mechanical floating suspension.
Longitudinal and transverse copying of the road slope.
Blade control from the driver's cab.
Blade type: rubber plowshare.
Blade lift/turn drive: hydraulic.
Width of the processed strip, mm: 2700 mm
Weight: not more than 1120kg.
Blade width: 3200mm.
Height: 1300mm.
Working speed: not more than 60 km/h.
Longitudinal and transverse copying of the road slope.
Blade control from the driver's cab.
Blade type: metal.
Blade lift/rotation drive is hydraulic.
ЩО-10 is installed in the interbase space. In summer, the sweeping brush is used to sweep debris from the roadway, in winter – for patrol snow removal. The advantage of this equipment over the classic chain design is the presence of a hydraulic drive, which gives:
A more reliable attachment to the chassis of the car, independent of the binding to the gearbox;
Easy operation and maintenance of the drive (if necessary, maintenance or replacement is possible
the hydraulic motor does not require a special tool);
The drive of the brush equipment is made from the hydraulic system of the equipment;
Hydromechanism that eliminates vibration of the brush during operation;
The ability to adjust the clamping force of the brush from the driver's cabin;
Adjusting the brush contact with the ground using a hydraulic cylinder;
The presence of a mechanism for adjusting the height of the brush relative to the roadway, eliminating uneven wear of the pile
The brush drive mechanism is protected from overloads.
The total width of the brush on the pile, m is not less than 2.84,
The width of the processed strip is maximum, m at least 2.5,
Pile diameter: 550 mm
Pile material: polypropylene.
Weight: 150 kg
The distance from the road surface to the brush in transport position: 160 mm.
Rotation speed, rpm at least 470.
Operating speed, km/h, no more than 40.
The angle of rotation of the brush, deg. at least 30.
Lifting and lowering using a two–way hydraulic cylinder.
The exclusion of debris and aggressive materials from entering the power units of the car is ensured.
Hydraulic oil cooling system:
is provided by an additional radiator.
Width of the processed strip, mm: 2600 mm
Weight: not more than 470 kg.
Blade width: 2780mm.
Height: 1080 mm.
Working speed: not more than 40 km/h.
Blade control from the driver's cab.
Blade type: Metal.
Blade lift/turn drive - hydraulic.
Width of the processed strip, mm: 2600 mm
Weight: not more than 1100kg.
Blade width: 3130mm.
Height: 1220 mm.
Working speed: not more than 40 km/h.
Blade control from the driver's cab.
Blade type: metal.
Blade lift/turn drive is hydraulic.
.png)
|
Operating pressure in the hydraulic system, MPa |
hydraulic |
|
Weight of the equipment, kg, |
1,7 – 2,0 |
|
Overall dimensions, mm.: |
120 |
|
-length |
2760 |
|
-width |
1180 |
|
-height |
1130 |
|
Max. operating speed, km/h |
30 |
The difference in the OM-7 and OM-8 equipment is the drive for turning the washing rack. At OM-7, the turn is made manually, at OM-8, the turn is made from the cab of the car by electric drive).
Type of actuator drive
Operating pressure in the hydraulic system, MPa
The width of the sink with a comb, m:
Height of the sink with a comb, m
Weight of the equipment, kg,
Overall dimensions, mm.:
-length
-width
