ЩО-10 is installed in the interbase space. In summer, the sweeping brush is used to sweep debris from the roadway, in winter – for patrol snow removal. The advantage of this equipment over the classic chain design is the presence of a hydraulic drive, which gives:
A more reliable attachment to the chassis of the car, independent of the binding to the gearbox;
Easy operation and maintenance of the drive (if necessary, maintenance or replacement is possible
the hydraulic motor does not require a special tool);
The drive of the brush equipment is made from the hydraulic system of the equipment;
Hydromechanism that eliminates vibration of the brush during operation;
The ability to adjust the clamping force of the brush from the driver's cabin;
Adjusting the brush contact with the ground using a hydraulic cylinder;
The presence of a mechanism for adjusting the height of the brush relative to the roadway, eliminating uneven wear of the pile
The brush drive mechanism is protected from overloads.
The total width of the brush on the pile, m is not less than 2.84,
The width of the processed strip is maximum, m at least 2.5,
Pile diameter: 550 mm
Pile material: polypropylene.
Weight: 150 kg
The distance from the road surface to the brush in transport position: 160 mm.
Rotation speed, rpm at least 470.
Operating speed, km/h, no more than 40.
The angle of rotation of the brush, deg. at least 30.
Lifting and lowering using a two–way hydraulic cylinder.
The exclusion of debris and aggressive materials from entering the power units of the car is ensured.
Hydraulic oil cooling system:
is provided by an additional radiator.
